Compiling a New C/C++ Module to WebAssembly

When you’ve written a new code module in a language like C/C++, you can compile it into WebAssembly using a tool like Emscripten. Let’s look at how it works.

Emscripten Environment Setup

First, let's set up the required development environment.

Prerequisites

Get the Emscripten SDK, using these instructions: https://emscripten.org/docs/getting_started/downloads.html

Compiling an example

With the environment set up, let's look at how to use it to compile a C example to Emscripten. There are a number of options available when compiling with Emscripten, but the main two scenarios we'll cover are:

Compiling to wasm and creating HTML to run our code in, plus all the JavaScript "glue" code needed to run the wasm in the web environment.
Compiling to wasm and just creating the JavaScript.

We will look at both below.

Creating HTML and JavaScript

This is the simplest case we'll look at, whereby you get emscripten to generate everything you need to run your code, as WebAssembly, in the browser.

First we need an example to compile. Take a copy of the following simple C example, and save it in a file called hello.c in a new directory on your local drive:
```
#include <stdio.h>

int main(int argc, char ** argv) {
    printf("Hello World\n");
}
```
Now, using the terminal window you used to enter the Emscripten compiler environment, navigate to the same directory as your hello.c file, and run the following command:
```
emcc hello.c -s WASM=1 -o hello.html
```

The options we’ve passed in with the command are as follows:

-s WASM=1 — Specifies that we want wasm output. If we don’t specify this, Emscripten will just output asm.js, as it does by default.
-o hello.html — Specifies that we want Emscripten to generate an HTML page to run our code in (and a filename to use), as well as the wasm module and the JavaScript "glue" code to compile and instantiate the wasm so it can be used in the web environment.

At this point in your source directory you should have:

The binary wasm module code (hello.wasm)
A JavaScript file containing glue code to translate between the native C functions, and JavaScript/wasm (hello.js)
An HTML file to load, compile, and instantiate your wasm code, and display its output in the browser (hello.html)

Running your example

Now all that remains is for you to load the resulting hello.html in a browser that supports WebAssembly. It is enabled by default in Firefox 52+ and Chrome 57+/latest Opera (you can also run wasm code in Firefox 47+ by enabling the javascript.options.wasm flag in about:config, or Chrome (51+) and Opera (38+) by going to chrome://flags and enabling the Experimental WebAssembly flag.)

Note: If you try to open generated HTML file (hello.html) directly from your local hard drive (e.g. file://your_path/hello.html), you will end up with an error message along the lines of both async and sync fetching of the wasm failed. You need to run your HTML file through an HTTP server (http://) — see How do you set up a local testing server? for more information.

If everything has worked as planned, you should see "Hello world" output in the Emscripten console appearing on the web page, and your browser’s JavaScript console. Congratulations, you’ve just compiled C to WebAssembly and run it in your browser!

Using a custom HTML template

Sometimes you will want to use a custom HTML template. Let's look at how we can do this.

First of all, save the following C code in a file called hello2.c, in a new directory:

#include <stdio.h>

int main(int argc, char ** argv) {
    printf("Hello World\n");
}

Search for the file shell_minimal.html in your emsdk repo. Copy it into a sub-directory called html_template inside your previous new directory.
Now navigate into your new directory (again, in your Emscripten compiler environment terminal window), and run the following command:
```
emcc -o hello2.html hello2.c -O3 -s WASM=1 --shell-file html_template/shell_minimal.html
```
The options we've passed are slightly different this time:
- We've specified -o hello2.html, meaning that the compiler will still output the JavaScript glue code and .html.
- We've also specified --shell-file html_template/shell_minimal.html — this provides the path to the HTML template you want to use to create the HTML you will run your example through.
Now let's run this example. The above command will have generated hello2.html, which will have much the same content as the template with some glue code added into load the generated wasm, run it, etc. Open it in your browser and you'll see much the same output as the last example.

Note: You could specify outputting just the JavaScript "glue" file* rather than the full HTML by specifying a .js file instead of an HTML file in the -o flag, e.g. emcc -o hello2.js hello2.c -O3 -s WASM=1. You could then build your custom HTML completely from scratch, although this is an advanced approach; it is usually easier to use the provided HTML template.

Emscripten requires a large variety of JavaScript "glue" code to handle memory allocation, memory leaks, and a host of other problems

Calling a custom function defined in C

If you have a function defined in your C code that you want to call as needed from JavaScript, you can do this using the Emscripten ccall() function, and the EMSCRIPTEN_KEEPALIVE declaration (which adds your functions to the exported functions list (see Why do functions in my C/C++ source code vanish when I compile to JavaScript, and/or I get No functions to process?)). Let's look at how this works.

To start with, save the following code as hello3.c in a new directory:
```
#include <stdio.h>
#include <emscripten/emscripten.h>

int main(int argc, char ** argv) {
    printf("Hello World\n");
}

#ifdef __cplusplus
extern "C" {
#endif

void EMSCRIPTEN_KEEPALIVE myFunction(int argc, char ** argv) {
    printf("MyFunction Called\n");
}

#ifdef __cplusplus
}
#endif
```
By default, Emscripten-generated code always just calls the main() function, and other functions are eliminated as dead code. Putting EMSCRIPTEN_KEEPALIVE before a function name stops this from happening. You also need to import the emscripten.h library to use EMSCRIPTEN_KEEPALIVE.

Note: We are including the #ifdef blocks so that if you are trying to include this in C++ code, the example will still work. Due to C versus C++ name mangling rules, this would otherwise break, but here we are setting it so that it treats it as an external C function if you are using C++.
Now add html_template/shell_minimal.html into this new directory too, just for convenience (you'd obviously put this in a central place in your real dev environment).
Now let's run the compilation step again. From inside your latest directory (and while inside your Emscripten compiler environment terminal window), compile your C code with the following command. (Note that we need to compile with NO_EXIT_RUNTIME, which is necessary as otherwise when main() exits the runtime would be shut down — necessary for proper C emulation, e.g., atexits are called — and it wouldn't be valid to call compiled code.)
```
emcc -o hello3.html hello3.c -O3 -s WASM=1 --shell-file html_template/shell_minimal.html -s NO_EXIT_RUNTIME=1  -s "EXTRA_EXPORTED_RUNTIME_METHODS=['ccall']"
```
If you load the example in your browser again, you'll see the same thing as before!
Now we need to run our new myFunction() function from JavaScript. First of all, open up your hello3.html file in a text editor.
Add a <button> element as shown below, just above the first opening <script type='text/javascript'> tag.
```
<button class="mybutton">Run myFunction</button>
```

Now add the following code at the end of the first <script> element:

document.querySelector('.mybutton')
    .addEventListener('click', function() {
        alert('check console');
        var result = Module.ccall(
            'myFunction',	// name of C function
            null,	// return type
            null,	// argument types
            null	// arguments
        );
    });

This illustrates how ccall() is used to call the exported function.